China factory direct sale catalyst combustor
If you are interested in this product, you can
Product Name: China factory direct sale catalyst combustor
Product Model: BST02-1
Products Exhibitors: Baisheng
Product Documentation: No Related Documents
Brief
T02-1 China catalyst combustor could be used to remove CO from petro gas, inert gas, oxygen and etc, also could be used in various furnace like oven, chimney place, incinerator to treat not burst CO.
Detailed description
China catalyst combustor
1. Introduction
T02-1 catalyst could be used to remove CO from petro gas, inert gas, oxygen and etc, also could be used in various furnace like oven, chimney place, incinerator to treat not burst CO.
Before using, T02-1 catalyst should be heated up to 180~200℃ by fresh air, in order to active its performance.
The best operating temperature: 250℃-300℃, after light-off, shut down automatically compensate for heating.
If the temperature is up to or above 550℃, cool the reactor by heat transfer and recover heat energy.
This catalyst could make CO content less than 0.5ppm under space velocity at 1.0~3.0×103 h-1,
T02-1 has high crushing strength, with service life at least 2 years.
2. Chemical information
Coating
|
>10.0 wt%
|
Activity component
|
could be vary with your requirement
|
Expulsion rate
|
<1%
|
3. Physical parameter
Item
|
Value
|
Catalyst carrier
|
material
|
alumina + cordierite
|
Specs
|
180*60*50mm
channel Qty: 25*10
wall thickness:1.1~1.4mm
|
Appearance
|
Light brown honeycomb
|
Space velocity
|
≥1×103 h-1
|
Light-off temperature
|
100℃-150℃
|
Operating temperature
|
250℃-300℃
|
CO removal ratio
|
≥98﹪
|
Service life
|
≥2 years
|
CO outlet content
|
<5ppm
|
Bulk density
|
0.68±0.05g/mL
|
Crushing strength
|
≥14 MPa
|
Package
|
moisture-proof
|
Suggested loading ratio
Height : diameter
|
4:1
|
Leave a message for product